Mechanical shredder operation method

Operation method of mechanical crusher 1. Check whether the surface of the crusher is faulty before operation; 2. Check the safety devices (emergency button, limit switch); 1. Check before starting the machine 3. Check whether there is any foreign matter in the hopper of the crusher; if so, need Cleared when the power is turned off. 4. Wear protective devices such as masks, glasses, etc.; 5. Fill in the equipment inspection form; 6. Turn on the power switch after confirming that it is correct, and turn on the fan power; 2. Turn on the shredder, observe the ammeter, and start feeding after it is stable (50A) 8. Feeding must be uniform to avoid overloading of the crusher, and the working current is strictly prohibited to exceed 150A; 3 Shut down 9. After the powder material process is completed, turn off the power of the motor; 10. Turn off the power of the fan when the suction is finished; 11. Wear and work Gloves to prevent scratches; 12. Turn off the power supply and emergency stop device; 13. Use a wrench to loosen the mounting bolts connecting the upper and lower parts of the crusher; 14. Loosen the manual screw plate and place it in the order of D, E, F; 15. Turn on the power, release the emergency stop, and turn on the hydraulic switch; 4 Clean the barrel 16. When the hydraulic indicator lights up, turn the selector switch to on to open the screen and hopper respectively; 17. Use to clean the crushing cavity and the screen , To ensure that the joint surface between the movable parts is cleaned; 18. After cleaning, turn the selector switch to off to close the screen and the hopper respectively; 19. Turn off the hydraulic switch and press the emergency stop; 20. Connect the upper and lower sides of the crusher 21. Install the manual screw plate in order; 22. After completion, turn off the power supply of the equipment;